|
|
EntraPass Icons |
Animated icons indicate the status of physical or logical components in the windows of EntraPass software. They represent the component status in real time and simulate a movement by displaying a series of pictures associated with the component. If a particular component status is difficult to identify, use this section to identify it.
Alarm Systems
Alarm system icons indicate the status of an alarm system within the Graphic desktop (Desktop > Graphic desktop) or in the “Operation” window.
Alarm system is in alarm
This animated icon appears when the alarm system is in alarm. It is displayed in:
• the Alarm message box when an acknowledgement is required.
• the “Operation” window
• the Desktop > Graphic desktop.
Alarm system is armed
This animated icon appears when the alarm system is armed. It is displayed in:
• the Operation window
• the Desktop > Graphic desktop.
Alarm system is armed with input in alarm (forced arming)
This animated icon appears when arming the alarm system while a surveillance area is in alarm. The system will allow you to arm the system (forced armed) and the icons will display the input in alarm in:
• the Operation window
• the Desktop > Graphic desktop.
Alarm system is in arming request delay
This animated icon appears when the alarm system in the “arming request” delay (waiting for confirmation with the arming request input button). It is displayed in:
• the “Operation” window
• the Desktop > Graphic desktop.
Alarm system is disarmed
This animated icon appears when the alarm system is disarmed. It is displayed in:
• the “Operation” window.
• the Desktop > Graphic desktop.
Alarm system is in entry delay
This animated icon appears when the alarm system is in “entry” delay. It is displayed in:
• the “Operation” window.
• the Desktop > Graphic desktop.
Alarm system is in “Exit” delay
This animated icon appears when the alarm system is in “exit” delay. It is displayed in:
• the “Manual Operation” window.
• the Desktop > Graphic desktop.
Alarm system status is not yet known
This animated icon appears when the status of the alarm system is unknown. It is displayed in:
• the “Graphic” window (the Desktop > Graphic desktop) when the status of the alarm system is unknown.
Alarm system is in “Postpone” mode
This animated icon appears when the alarm system is in “postpone” mode. Once this delay is over, the system will initiate the exit delay and arm again (if the “no disarm” schedule is still valid). It is displayed in:
• the Operation window.
• the “Graphic” window (the Desktop > Graphic desktop).
Controllers
Controller animated icons indicate the status of a door controller in the graphic window (Desktop > Graphic desktop) or in the “Operation” window.
Status unknown
Appears when the EntraPass application has not received the component status after four (4) attempts. It is displayed in:
• the Operation window (alarms, areas, guard tours, door, elevator door, relay, input, reload data)
• or the Desktop > Graphic desktop.
Controller AC failure
Appears when the controller is in AC failure. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Controller Reset
Controller Polling Malfunction
Appears when the controller polling function is malfunctioning. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Controller
Controller AC failure and Tamper Switch in “alarm”
Appears when the controller is in AC failure and the tamper switch is in alarm. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Controller Reset
Controller is not communicating
Appears when the controller is not communicating. It is displayed in:
• the “Operation” — “Area”, “Guard Tour” and “Controller Reset” windows. “Controller Reset” windows. “Controller Reset” windows.
• the Desktop > Graphic desktop.
Controller communication is regular (no problem)
Appears when the controller is communicating and the communication is regular. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Controller Reset.
Controller is in “Reset” and AC failure
Appears when the controller is in “reset mode” and in “AC failure”. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Controller Reset.
Controller is in “Reset”, “AC failure” and “Tamper in alarm”
Appears when the controller is in “reset mode”, in “AC failure” and the tamper is in alarm. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Controller Reset
Controller is in reset and tamper in alarm
Appears when the controller is in “reset mode” and the tamper is in alarm. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Controller Reset.
Controller tamper in alarm
Appears when the controller tamper is in alarm. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Controller Reset when the controller tamper is in alarm.
Controller reloading firmware
Appears when the controller is reloading firmware. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Controller Reset.
KT-400 controller trouble
Appears when there is a KT-400 controller trouble. It is displayed in:
• the Desktop > Graphic desktop
• the Operation > Controller.
Doors
Icons representing a door state indicate the status of door within the graphic window (from the desktop) or within the “Operation” window.
Door forced open
This animated icon appears when the door is opened and that no access granted nor request to exit was permitted. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door, Elevator Door
Door forced open (reader disabled)
This animated icon appears when the door is opened and that no access granted nor request to exit was permitted and the reader is disabled. it is displayed in:
• the “Graphic” window (desktop—graphic)
• the Operation > Door, Elevator Door
Door closed and locked
This animated icon appears when the door is closed and locked. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door
Door closed and locked (reader disabled)
This animated icon appears when the door closed and locked and that the reader is disabled. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door.
Door open too long
This animated icon appears when the door is opened more than the permitted delay set in “open time”. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door, Elevator door.
Door open too long (reader disabled)
This animated icon appears when the door is opened more than the permitted delay set in “open time” and that the reader is disabled. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door, Elevator door.
Door open and unlocked manually
This animated icon appears when the door is opened and it was unlocked by an operator. it is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door > Elevator door.
Door open and unlocked manually (reader disabled)
This animated icon appears when the door is opened and it was unlocked by an operator and the reader is disabled. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door > Elevator door.
Door is opened and unlocked by schedule
This animated icon appears when the door is opened and it was unlocked by a schedule. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door > Elevator door.
Door is opened and unlocked by schedule (reader disabled)
This animated icon appears when the door is opened, and it was unlocked by a schedule and the reader is disable. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door > Elevator door.
Door pre-alarm on open too long
This animated icon appears when the door is opened more than half the time permitted delay set in “open time”. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door > Elevator door.
Door pre-alarm on open too long (reader disabled)
This animated icon appears when the door is opened more than half the time permitted delay set in “open time” and the reader is disabled. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door > Elevator door.
Door still opened schedule invalid
This animated icon appears when the door is opened and the unlock schedule is invalid. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door/Elevator door.
Door still opened schedule invalid (reader disabled)
This animated icon appears when the door is opened and the unlock schedule is invalid and the reader is disabled. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door/ Elevator door.
Door unlocked by an operator
This animated icon appears when the door is unlocked by an operator (manually). It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door > Elevator door.
Door unlocked by an operator (reader disabled)
This animated icon appears when the door is unlocked by an operator (manually) and the reader is disabled. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door/Elevator door.
Door unlocked by a schedule
This animated icon appears when the door is unlocked by a schedule. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door/Elevator door.
Door unlocked by a schedule (reader disabled)
This animated icon appears when the door is unlocked by a schedule and the reader is disabled.
It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door/Elevator door.
Elevator door unlocked and closed
This animated icon appears when the elevator door is closed and unlocked. It is displayed in:
• the Graphic desktop (Desktop > Graphic desktop window)
• the Operation > Door/Elevator door.
Relays
Relays icons indicate the status of a relay within the graphic window (from the desktop) or within the “Operation” window.
Relay activated by alarm system in alarm
This animated icon appears in:
• the “Graphic” window (desktop—graphic) for a relay triggered by an alarm system in alarm.
• the Operation > Relay when the relay is triggered by an alarm system in alarm.
Relay activated by alarm system function
This animated icon appears in:
• the “Graphic” window (desktop—graphic) for a relay triggered by a function of an alarm system.
• the Operation > Relay when the relay is triggered by a function of an alarm system.
Relay activated by alarm system delay
This animated icon appears in:
• the “Graphic” window (desktop—graphic) for a relay triggered by the delay of an alarm system.
• the Operation > Relay when the relay is triggered by the delay of an alarm system.
Relay activated by an event
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the relay is triggered by an event.
• the Operation > Relay when the relay is triggered by an event.
Relay temporarily activated by an event
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the relay is temporarily activated by an event.
• the Operation > Relay when the relay is temporarily activated by an event.
Relay activated by an input
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the relay is triggered by an input.
• the Operation > Relay when the relay is triggered by an input.
Relay temporarily activated by an input
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the relay is temporarily activated by an input.
• the Operation > Relay when the relay is temporarily activated by an input.
Relay activated by an operator
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the relay is activated by an operator.
• the Operation > Relay when the relay is activated by an operator.
Relay temporarily activated by an operator
This animated icon appears in:
• the “Graphic” window (desktop—graphic) for a relay temporarily activated by an operator.
• the Operation > Relay when the relay is temporarily activated by an operator.
Relay temporarily activated by a schedule
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the relay is activated by a schedule.
• the Operation > Relay when the relay is activated by a schedule.
Relay deactivated
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the relay is not activated.
• the Operation > Relay when the relay is not activated.
Inputs
This section is used to indicate the status of an input within the graphic window (from the desktop) or within the “Operation” window.
Input activated—Not supervised
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is activated and the monitoring schedule is invalid.
• the Operation > Input when the input is activated and the monitoring schedule is invalid.
Input activated—Supervised
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is activated and the monitoring schedule is valid.
• the Operation > Input when the input is activated and the monitoring schedule is valid.
Input activated—Not supervised manual operation
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is activated, manually operated and the monitoring schedule is invalid.
• the Operation > Input when the input is activated, manually operated and the monitoring schedule is invalid.
Input activated—Supervised manual operation
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is activated, manually operated and the monitoring schedule is valid.
• the Operation > Input when the input is activated, manually operated and the monitoring schedule is valid.
Input activated—Supervised temporarily manual operation
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is activated, manually operated and the monitoring schedule is temporarily valid.
• the Operation > Input when the input is activated, manually operated and the monitoring schedule is temporarily valid.
Input in alarm—Not supervised
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is in alarm and the monitoring schedule is invalid.
• the Operation > Input when the input is in alarm and the monitoring schedule is invalid.
Input in alarm—Shunted by operator
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is in alarm and it is shunted by an operator.
• the Operation > Input when the input is in alarm and it is shunted by an operator.
Input in alarm—Supervised
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is in alarm and the monitoring schedule is valid.
• the Operation > Input when the input is in alarm and the monitoring schedule is valid.
Input in alarm—Supervised by operator
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is in alarm and it is supervised by an operator (continuous supervision).
• the Operation > Input when the input is in alarm and it is supervised by an operator (continuous supervision).
Input OK—Not supervised
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is in normal condition and the monitoring schedule is invalid.
• the Operation > Input when the input is in normal condition and the monitoring schedule is invalid.
Input OK—Shunted by operator
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is in normal condition and it is shunted by an operator.
• the Operation > Input when the input is in normal condition and it is shunted by an operator.
Input OK—Supervised
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is in normal condition and the monitoring schedule is valid.
• the Operation > Input when the input is in normal condition and the monitoring schedule is valid.
Input OK—Supervised by operator
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the input is in normal condition and it is supervised by an operator (continuous supervision).
• the Operation > Input when the input is in normal condition and it is supervised by an operator (continuous supervision).
Controller connection
These icons indicate the status of a connection, or gateway within the graphic window (from the desktop) or within the “Operation” window.
Connection status is not yet known
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the status of the controller connection is not yet known.
Controller connection connected
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the connection is connected and communication is OK.
• the Operation > Reload data when the connection is connected and communication is OK.
Controller connection connected and in “Reload Data”
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the connection is connected and is in “reload data” state.
• the Operation > Reload data when the connection is connected and is in “reload data” state.
Controller connection—Communication Failure
This animated icon appears in:
• the “Graphic” window (Desktop—graphic) when the connection is disconnected and there is a communication failure.
• the Operation > Reload data when the connection is disconnected and there is a communication failure.
Gateways
Gateway—Communication Failure
This animated icon appears in:
• the “Operation” (door, elevator door, relay, input, reload gateway) window when the gateway is in communication failure.
• the “Graphic” window (desktop—graphic) when the gateway is in communication failure.
Gateway in “Reload Data”
This animated icon appears in:
• the “Graphic” window (Desktop—graphic) when the gateway is being reloaded.
• the Operation > (door, elevator door, relay, input, reload gateway) when the gateway is being reloaded.
Gateway—Communication Failure during Reload Data
This animated icon appears in:
• the “Operation” (reload data gateway) window when the gateway loses communication during a reload data operation.
• the “Graphic” window (desktop—graphic) when the gateway loses communication during a reload data operation.
Gateway communication is regular (no problem)
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the gateway is communicating and the communication is regular.
• the Operation > Reload data gateway, communication is regular.
Gateway Trouble
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the gateway is not communicating.
• the Operation > Reload data gateway, the gateway is not communicating.
Gateway Trouble when Reloading
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the gateway is not communicating.
• the Operation > Reload data gateway is not communicating with the gateway during a reload data operation.
Gateway (Gateway Software Interface):
Gateway OK—communicating
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the gateway is communicating.
• the Operation > Reload data when the gateway is communicating.
Gateway in “Reload Data”
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the gateway is being reloaded.
• the Operation > Reload data when the gateway is being reloaded.
Gateway—Communication Failure
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when gateway is not communicating.
• the Operation > Reload data when the gateway is not communicating.
Gateway—Reload KT-NCC Firmware
This animated icon appears in
• the “Graphic” window (desktop—graphic) when the system is performing an automatic upgrade of the KT-NCC firmware.
• the “Operation” when the system is performing an automatic upgrade of the KT-NCC firmware.
EntraPass Application
Application status is not yet known
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the status of the application is not yet known.
Application attempts communication
This animated icon appears in:
• the start-up window when the workstation attempts to communicate with the server.
Application—Communication Failure
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the workstation is in communication failure.
• the “Operation” window (alarm, area, guard tour, door, elevator door, relay, input, reload gateway) when the workstation is in communication failure.
Others
Database Initialization
This animated icon appears in:
• the start-up window when the workstation initializes the database.
Data not available
This animated icon is used to indicate a transient stage. This could indicate that the requested information is not currently available.
No status available
This animated icon is used to indicate a transient stage. This could indicate that the requested component status is not currently available.
Output status is not yet known
This animated icon appears in:
• the “Graphic” window (desktop—graphic) when the status of the output is not yet known.
Status unknown
This animated icon appears in:
• the “Operation” (alarms, areas, guard tours, door, elevator door, relay, input, reload) window when the workstation has not received the component status after four (4) attempts.
• the “Graphic” window (desktop—graphic) when the workstation has not received the component status after four (4) attempts.
Error in process
This animated icon appears in:
• the “Operation” (alarms, areas, guard tours, door, elevator door, relay, input, reload data) window when a specific error is detected.
• the “Graphic” window (desktop—graphic) when a specific error is detected.
Undefined Component
This animated icon appears in:
• the “Operation” window (alarm, areas, guard tour, door, elevator door, relay, input, reload data gateway) when the component does not exist.
• the “Graphic” window (desktop—graphic) when the component does not exist.